Products > Respiratory Care > Respiratory Humidifier > CH510
CH340
Respiratory Humidifier
The CH340® Respiratory Humidifier is designed to warm and add humidity to gases, which are delivered to the patient requiring artificial respiration using a respiratory care equipment, such as BiPAPs, CPAPs, etc., where the gas flow remains at constant level.
The gas flows through heated water surface and then warmed and humidified, based on the setting on the front control panel. The temperature of the gas delivered to the patient (patient end temperature) is monitored using the temperature probe and displayed on the unit. The patient end temperature is controlled by humidifier based on the temperature control setting selected.
The CH340® Respiratory Humidifier is designed to warm and add humidity to gases, which are delivered to the patient requiring artificial respiration using a respiratory care equipment, such as BiPAPs, CPAPs, etc., where the gas flow remains at constant level.
The gas flows through heated water surface and then warmed and humidified, based on the setting on the front control panel. The temperature of the gas delivered to the patient (patient end temperature) is monitored using the temperature probe and displayed on the unit. The patient end temperature is controlled by humidifier based on the temperature control setting selected.
Salient Features
- Compact, Light Weight & Easy to Operate
- With Built-in Overheat Protection
- Adaptable with all Respirators
- Easy to Read Patient’s Airway Temperature and Alarms
- User Adjustable Temperature Control
Specifications
Device Characteristics
| Thermal Cutout | 95 + 5 °C |
| Warm-up Period | < 30 minutes |
| Input Flow Range | 5 ~ 40 lpm |
| Display | Three Digit, 14 mm, 7 Segment Green LED Display |
| Temperature Display Range | 10 ~ 70 °C |
| Temperature Display Resolution | + 0.1 °C |
| Temperature Display Accuracy | + 0.5 °C |
| Alarms | Audio-Visual Alarms for Probe Disconnection, Probe Failure, PCB Failure, High & Low Temperature |
Electrical Characteristics
| Power Supply | 230 VAC ± 10%, 50/60 Hz, Sine Wave |
| Heater Plate Capacity | 90 W (at nominal mains voltage) |
| Electrical Fuse | 2 x 1 Amp, 250V, Fast blow |
Physical Characteristics
| Dimensions (L x W x H) | 165 x 135 x 155 mm³ |
| Weight | 1.4 kg |
Environmental Characteristics
| Temperature Range | Operation: 18 ~ 26 °C Storage: -10 ~ 50 °C |
| Relative Humidity Range | Operation: Upto 85% (non-condensing) Storage: Upto 95% |
| Ambient Pressure Range | Upto 20 kPa |
Classification & Compliances
| Device Classification | Continuous Operations, Class I, Type B, Drip Proof IPX1; Non-Sterile, Active Medical Device – AC |
| Compliances & Certifications | IEC 60601-1 (Safety); IEC 60601-1-2 (EMC) |
| Intended Patient Population | Adult Patients (requiring non-invasive ventilation) |
Accessories
- Temperature Probe (Standard)
- Flat Mounting Clamp (Optional)
Note: Product specifications, part / model numbers, and accesories options are subject to change, without prior notice.
